BPNPL - 402150, FRESH KOTE LATEX FLAT WHITE

  • MSDS: BPNPL
  • Manufacturer: M A BRUDER AND SONS INC
  • Product Name: 402150, FRESH KOTE LATEX FLAT WHITE
  • National Stock Number: 8010-00N033058
Product Identification

Product ID:402150, FRESH KOTE LATEX FLAT WHITE
MSDS Date:01/11/1990
FSC:8010
NIIN:00N033058
MSDS Number: BPNPL

Responsible Party
M A BRUDER & SONS INC
600 REED RD
BROOMALL, PA 19008
US

Emergency Phone: 215-353-5100;215-359-3635

Info Phone: 215-353-5100

Cage: 85519

Contractor
M A BRUDER & SONS INC
600 BROOMALL, PA 19008 US

Telephone: 610-353-5100;610-359-3635

Cage: 85519

Ingredients

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 1-10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


CALCIUM CARBONATE; (MARBLE), (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 11-30%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


DIATOMACEOUS EARTH

CAS: 68855-54-9

Fraction By Weight: 1-10%

OSHA PEL 10 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


CLAY; (KAOLIN)

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 1-10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293


AMPHIGENE; (AL SILICATES)

CAS: 1327-44-2

Fraction By Weight: 0%


3.2%.

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 1-10%

OSHA PEL 50 PPM, C

ACGIH TLV: 50 PPM, C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


STYRENE-ACRYLIC POLYMER

Fraction By Weight: >3%


VINYL ACRYLIC RESIN

CAS: 25067-01-0

Fraction By Weight: >3%


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: >3%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: MAY CAUSE HEADACHE AND
NAUSEA. SKIN: POSSIBLE PRIMARY IRRITATION (MATERIAL IS SLIGHTLY
ALKALINE). EYE: PRIMARY IRRITATION. CHRONIC: NONE RECOGNIZED.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHALATION: REMOVE FROM EXPOSURE. SKIN: REMOVE MATERIAL WITH
SOAP AND WATER. REMOVE CONTAMINATED CLOTHING. EYES: FLUSH
IMMEDIATELY WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES.
CONSULT PHYSICIA N FOR SPECIAL MEDICAL TREATMENT. INGESTION: CALL
MD IMMEDIATELY .

Fire Fighting

Flash Point:NON-FLAMMABLE
Lower Limits:SEE ING 6
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE CONDITIONS
.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE (DUE TO
BUILD- UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:COLLECT IN CONTAINER FOR DISPOSAL. CLEAN UP
WITH WATER BEFORE ALLOWING TO DRY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP FROM FREEZING. DO NOT STORE IN
SUN OR ABOVE 120F.
Other Precautions:DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF
CHILDREN.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED MECHANICAL FILTER RESPIRATOR
TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY DURING SPRAY
APPLICATION.
Ventilation:MAINTAIN ADEQUATE VENTILATION TO ENSURE AIR ENTRY DURING
APPLICATION AND DRYING.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USE PROTECTIVE SKIN CREAM IF NEEDED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Vapor Pres:ING 6
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHYL ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:66-69

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:IF INVOLVED IN FIRE (FROM OTHER
SOURCES) COULD CONCEIVABLY RESULT IN RELEASE OF CO2 AND CO.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.